Flickering Flames: Deadbugging an ATTiny
information This is a guide that brings together a series of guides and information I discovered when looking for fun projects. It uses deadbugging to create a stand-alone functioning circuit. This is based on the beautiful project on Tinker Log for a ‘geeky...
Easy to use ‘over the air’ OTA (wifi) to program your ESP32!
This is an information post mostly for myself – I spent a lot of time trying to program my ESP32 using the OTA functionality of it and some of it is a bit clumsy. I created a board that I will be soldering the chip version of the ESP and this particular board I...
OLED & Arduino Heaven
I posted images online of prototypes I had been working on, and Marcelo Souza commented about trying an OLED. I had thought about it before but the ones I had looked at (or even ordered to play around with) all were relatively expensive. If I wanted to incorporate one...
Breaking up Arduino: how to make your own arduino!
I’ve been looking at breaking out the ATMEGA328P-PU chip (that is used in many Arduino boards) to be able to reduce the footprint and power consumption of the boards. This post will show you how to make your own Arduino. WOOP! NOTE: I had a look through this...Tinker Tailor
When I started making wearable electronics - it was very difficult to find unusual parts, small components, fabrics, conductive materials, all in one place. I decided to create Tinker Tailor to address this for makers!
www.TinkerTailor.tech supplies the difficult-to-get parts for the Wearable Electronics community. My aim is to provide you with everything you need to make wearable technology projects, for beginners and experienced makers too.
